DESIGNING A MOTORCYCLE SECURITY SYSTEM WITH INTERNET OF THINGS (IOT) AND BLUETOOTH TECHNOLOGY USING NODEMCU
DOI:
https://doi.org/10.58436/jeepa.v3i1.1487Keywords:
GPS (Global Positioning System), Security system, IoT, NodeMCU, BluetoothAbstract
The increase in motorcycle sales means that almost all people in the community can own a motorcycle, but if the development is not balanced with a security system, the theft rate becomes very high. Because in general, motorcycles use conventional locks that are easily damaged by thieves using a T lock. In this study, a motorcycle security system was created that combines Internet of Things technology with Bluetooth technology and is equipped with GPS (Global Positioning System).The microcontroller used is NodeMCU, the application of IoT and Bluetooth media and GPS is used for communication between the device and the Android Smartphone application. For its output using a relay module, the relay functions to turn on/off the contacts and motorcycle horn by giving commands through the application as a data sender. The GPS module will provide data on the coordinates of the motorcycle's location which is displayed on the GPS application of the tool.After testing the entire system, both applications and a series of components have different responses. IoT media has a response that depends on the internet connection used. the response of turning on the contact is 0.89 seconds and the horn is 0.89 seconds, turning off the contact is 0.84 seconds and the horn is 1.05 seconds. The bluetooth media response is turning on the contact which is 0.94 and the horn is 0.42 seconds, turning off the contact is 0.69 seconds and the horn is 1.10 seconds. In the GPS system, the difference in distance between the GPS device and the GPS smartphone is 2.67 meters.
References
C. N. N. Anna, “PENGGUNAAN MICROCONTROLLER SEBAGAI PENDETEKSI POSISI DENGAN MENGGUNAKAN SINYAL GSM Anna,” vol. 4, no. 1, pp. 430–439, 2010.
M. miftahuddin Thoyyib, “Motorcycle Security System From Robber , Using Sms and Gps Based,” J. Elektron. Pendidik. Tek. Elektron., vol. 7, no. desember 2018, pp. 7–17, 2018.
Junaidi, “INTERNET OF THINGS , SEJARAH , TEKNOLOGI DAN PENERAPANNYA : REVIEW,” vol. I, no. 3, pp. 62–66, 2015.
Salamah, A. Taqwa, and A. T. Wibowo, “RANCANG BANGUN SISTEM KEAMANAN SEPEDA MOTOR BERBASIS IOT,” vol. 10, no. 2, pp. 103–112, 2020.
T. Daviend, B. Nugroho, A. Gunadhi, and E. Raguindin, “Tire Pressure and the Availability of Gasoline Monitoring Tools Based on IOT,” vol. 00024, 2020.
D. A. Aziz, “Webserver Based Smart Monitoring System Using ESP8266 Node MCU Module,” vol. 9, no. 6, pp. 801–808, 2018.
W. Koodtalang and T. Sangsuwan, “Improving Motorcycle Anti-Theft System with the use of Bluetooth Low Energy 4 . 0,” pp. 4–8, 2016.
S. Patil and M. G. Hegde, “SMART MOTORCYCLE SECURITY,” pp. 3–6, 2016.
R. Rumimper, S. R. U. A. Sompie, and D. J. Mamahit, “Rancang Bangun Alat Pengontrol Lampu Dengan Bluetooth Berbasis Android,” vol. 5, no. 3, 2016.
P. Vaya, R. Simon, and S. K. Khatri, “Motorcycle Safety Solution using the Internet of Things,” 2019 4th Int. Conf. Inf. Syst. Comput. Networks, pp. 95–98, 2019.
E. E. Prasetiyo, “APLIKASI INTERNET OF THINGS ( IoT ) UNTUK PEMANTAUAN DAN PENGENDALIAN BEBAN LISTRIK DI RUANGAN” vol. 4, no. 2, pp. 28–39, 2017.
Artono and R. G. Putra, “PENERAPAN INTERNET OF THINGS ( IOT ) UNTUK KONTROL LAMPU MENGGUNAKAN ARDUINO BERBASIS WEB,” vol. 05, no. 01, pp. 9–16, 2018.
S. Anwar and Hermanto, “Pemanfaatan Internet of Thing ( IoT ) dalam Pengendalian Lampu dan Kipas Berbasis Android In Control of Lights and Fans Based on Android,” RESTIKOM Ris. Tek. Inform. dan Komput., vol. 1, no. 2, pp. 28–37, 2019, [Online]. Available: https://restikom.nusaputra.ac.id/index.
E. A. Satya, Y. Christiyono, and M. Somantri, “PENGONTROLAN LAMPU MELALUI INTERNET MENGGUNAKAN MIKROKONTROLLER ARDUINO BERBASIS ANDROID,” 2017.
Susanto and I. D. Jauhari, “RANCANG BANGUN APLIKASI ANDROID UNTUK KONTROL LAMPU GEDUNG MENGGUNAKAN MEDIA BLUETOOTH BERBASIS ARDUINO UNO,” vol. 8, no. 1, pp. 51–58, 2019.
U. Panggalo et al., “RANCANG BANGUN SISTEM STARTER SEPEDA MOTOR MENGGUNAKAN SMARTPHONE BERBASIS MIKROKONTROLLER,” vol. 4, no. 1, pp. 17–23, 2018.
Andesta and R. Ferdian, “SISTEM KEAMANAN SEPEDA MOTOR BERBASIS MIKROKONTROLER DAN MODUL GSM,” vol. 02, pp. 51–63, 2018.
S. Samsugi, Ardiansyah, and D. Kastutara, “Sistem Kendali Jarak Jauh Berbasis Arduino dan Modul WiFi Esp8266,” vol. 12, no. 1, pp. 295–303, 2017.
M. T. Indriastuti, S. Arifin, N. Fadhilah, and T. Aprilianto, “Rancang Bangun Sistem Keamanan Sepeda Motor Menggunakan Arduino Nano Dan Android Via Bluetooth,” J. Ilm. Teknol. Inf. Asia, vol. 14, no. 1, p. 19, 2020, doi: 10.32815/jitika.v14i1.425.
Valdez, C. Canales, D. Huamán, C. Pascual, M. Chauca, and J. Grados, “Vehicle security system with monitoring of homeostatic processes and user validation via bluetooth,” IOP Conf. Ser. Mater. Sci. Eng., vol. 383, no. 1, 2018, doi: 10.1088/1757-899X/383/1/012057.
L. Agus, P. Agus, and L. Septia, “PENGENDALIAN LAMPU RUMAH BERBASIS GOOGLE ASISSTANT MELALUI SMARTPHONE MENGGUNAKAN NodeMCU-12E ESP8266 DI NUKE KOMPUTER SERVICE,” vol. 20, no. 2, pp. 1–6, 2019.
N. L. Mufidah, “Sistem Informasi Curah Hujan Dengan Nodemcu Berbasis Website,” Ubiquitous Comput. its Appl. J., vol. 1, pp. 25–34, 2018, doi: 10.51804/ucaiaj.v1i1.25-34.
M. A. Deka, Kholistianingsih, and Wahjudi Dodi, “RANCANG BANGUN OTOMASISASI SISTEM RUMAH ANTI BANJIR BERBASIS NODEMCU ESP8266 DAN BOT TELEGRAM,” 2020.
Ikhsan and Elfizon, “Sistem Keamanan Sepeda Motor Berbasis Internet of Things,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, pp. 162–167, 2020.
M. Johan and A. Missyamsu, “SISTEM KEAMANAN SEPEDA MOTOR BERBASIS GPS DAN ANDROID,” vol. 2, no. 2, pp. 242–249, 2019.
