DESIGN AND CONSTRUCTION OF A TEMPERATURE AND HUMIDITY AUTOMATION SYSTEM IN A MUSHROOM HOUSE USING RASPBERRY PI
DOI:
https://doi.org/10.58436/jeepa.v5i1.2275Keywords:
Oyster Mushrooms, Raspberry Pi, DHT11, Internet of Things, Automation SystemAbstract
Air temperature and humidity factors can affect the growth and development of oyster mushroom plants. Ideally, oyster mushroom cultivation in highland areas has a low temperature, ranging from 22-28 ° C and humidity> 70%, if the cultivator wants to develop oyster mushroom cultivation has land / location in the lowlands which tends to have high temperatures, the mushrooms will die easily. In lowland locations the average temperature is 33-37 ° C, so there is a need for a tool that can control and monitor the humidity and temperature of the mushroom cultivation room, so that the cultivation room gets the ideal temperature. In this research, the author makes a monitoring system for air temperature and humidity using a DHT-11 sensor in Internet of Things-based oyster mushroom cultivation in an oyster mushroom cultivation house, if the temperature in the room is detected> 28 ° C, the Raspberry Pi microcontroller will give orders to the relay to turn on the fan and water pump. Fans and water pumps function to increase humidity and reduce temperature. This tool can certainly make it easier for us to monitor and control the temperature in the room, so that the temperature in the room can be maintained, so that oyster mushrooms can grow well and have good quality too.
References
Fitriawan, Helmy, Sri Purwiyanti, and Syaiful Alam. "Pengendalian suhu dan kelembaban pada budidaya jamur tiram berbasis IoT." Jurnal Teknik Pertanian Lampung 9.1 (2020): 28-37.
Habibuddin, Julianti, Muslimin Muslimin, and Muh Fadil Prasetyo. "Monitoring Suhu Dan Kelembapan Berbasis Thingspeak Pada Rumah Jamur Tiram." JURNAL IT 13.1 (2022): 31-34.
N. I. Ratnaningtyas, N. Ekowati, D. Bhagawati, and S. Lestari, “Implementasi Hasil Pelatihan Perawatan dan Pengelolaan Pasca Panen Jamur Tiram Putih,” COMSEP J. Pengabdi. Kpd. Masy., vol. 1, no. 1, pp. 68–77, 2020.
Anisum, Anisum, Nursigit Bintoro, and Sunarto Goenadi. "Analisis distribusi suhu dan kelembaban udara dalam rumah jamur (kumbung) menggunakan computational fluid dynamics (CFD)." Agritech 36.1 (2016): 64-70.
Arminarahmah, Nur, Desy Ika Puspitasari, and Mokhamad Ramdhani Raharjo. "Implementasi Alat Pengendali Suhu Dan Kelembapan Kumbung Jamur Pada Industri Rumah Tangga Jamur Jejamuran Teteh Sri." Panrita Abdi-Jurnal Pengabdian pada Masyarakat 6.3 (2022): 557-564.
Awi, Fransiskus Belicoy, Abd Rabi, and Wahyu Dirgantara. "Pengimplementasian Metode Fuzzy Logic pada Kontrol Rumah Jamur Otomatis Berbasis Node-RED." Jurnal Teknik Elektro dan Komputer TRIAC 9.2 (2022): 130-134.
Tasya, Nur, and Vivi Silvia. "Peran Inovasi Teknologi Dalam Meningkatkan Efisiensi Ekonomi Pertanian." JSSTEK-Jurnal Studi Sains dan Teknik 2.1 (2024): 90-97.
Arsella, Shendy, Mohammad Fadhli, and Lindawati Lindawati. "Optimasi Pertumbuhan Jamur Tiram Melalui Monitoring Suhu dan Kelembaban Menggunakan Teknologi IoT." Jurnal RESISTOR (Rekayasa Sistem Komputer) 6.1 (2023): 34-42.
Tapi, Triman, and Yohanis Yan Makabori. "Transformasi penyuluhan pertanian menuju society 5.0: analisis peran teknologi informasi dan komunikasi." Journal of Sustainable Agriculture Extension 2.1 (2024): 37-47.
Wibowo, Yuli, Febriansah Eka Prasetyadana, and Bertung Suryadharma. "Implementasi Monitoring Suhu dan Kelembaban pada Budidaya Jamur Tiram dengan IOT Implementation of Temperature and Humidity Monitoring at Oyster Mushroom Cultivation with IOT." Jurnal Teknik Pertanian Lampung 10 (2021): 380-391.
Triyanto, Anggi, and K. N. Nurwijayanti. "Pengatur Suhu dan Kelembapan otomatis pada Budidaya Jamur tiram menggunakan mikrokontroler ATMega16." TESLA: Jurnal Teknik Elektro 18.1 (2016): 25-36
Subekti, Ananda Bayu, Adnan Muchlis Romdoni, and Jundy Maulana Sidiq. "Rancang Bangun Sistem Monitoring Suhu Dan Kelembapan Dengan Kontrol Pompa Air Berbasis Internet Of Things Pada Kebun Budidaya Jamur." Prosiding Seminar Nasional Teknologi Informasi dan Bisnis. 2024.
Wajiran, Wajiran, et al. "Desain Iot Untuk Smart Kumbung Dengan Thinkspeak Dan Nodemcu." POSITIF: Jurnal Sistem dan Teknologi Informasi 6.2 (2020): 97-103.
Ridwansyah, Ridwansyah, et al. "Pendampingan Peningkatan Produktivitas Pembudidaya Jamur Tiram Melalui Pemanfaatan Teknologi Monitoring Berbasis Iot (Internet Of Things)." RESONA: Jurnal Ilmiah Pengabdian Masyarakat 8.1 (2024): 26-35.
Roby, Friadi, and Junadhi Junadhi. "Sistem kontrol intensitas cahaya, suhu dan kelembaban udara pada greenhouse berbasis raspberry PI." JTIS 2.1 (2019).
Amalia, Putri Rizki, and Alan Novi Tompunu. "Penggunaan Sensor PIR (Passive Infra Red) HC-SR501 Sebagai Sistem Keamanan Berbasis Raspberry Pi." TEKNIKA 12.1 (2018): 23-30.
Effendi, Mufid Ridlo, Eki Ahmad Zaki Hamidi, and Aria Alginusa Suhardi. "Rancang Bangun Sistem Pendeteksi Manusia Pada Ruangan Menggunakan Raspberry Pi 3 Type B Dan Internet." Prosiding Seminar Nasional Teknik Elektro UIN Sunan Gunung Djati Bandung. 2018.
Riyadi, Bayu, and A. Hendriyawan. "Rancang Bangun Sistem Keamanan Rumah Berbasis Piranti Raspberry Pi 3 Menggunakan Internet Of Things." Tugas Akhir thesis, University of Technology Yogyakarta (2019).
M. Riski, A. Alawiyah, M. Bakri, and N. U. Putri, “Alat Penjaga Kestabilan Suhu Pada Tumbuhan Jamur Tiram Putih Menggunakan Arduino UNO R3,” J. Tek. dan Sist. Komput., vol. 2, no. 1, pp. 67–79, 2021.
I. Aminudin, “Naskah publikasi pengembangan kontrol suhu dan kelembapan otomatis dalam budidaya jamur tiram berbasis arduino uno,” pp. 1–8, 2020.
M. Firly, D. Wahjudi, and P. Yulianto, “Perancangan Sistem Penyiraman Dan Pemupukan Otomatis (Smart Garden) Berbasis Iot (Internet of Things) Menggunakan Nodemcu Esp8266,” Teodolita Media Komunkasi Ilm. di Bid. Tek., vol. 23, no. 1, pp. 115–1129, 2022, doi: 10.53810/jt.v23i1.444.
E. Sudaryanto, T. Watiningsih, R. Afif Safarli, N. Darmawan, and D. Teknik Elektro, “Implementasi Internet of Things Untuk Menghidupkan Mesin Sepeda Motor Honda Supra X 125 Melalui Smartphone Berbasis Wemos D1 Mini Implementation Of The Internet of Things To Turn On The Engine Of The Honda Supra,” pp. 1–7, 2023
I. Parinduri, “Pembelajaran Aplikasi Iot Di Android Dengan Software Blynk (Kontrol Led, Relay, dan Suhu),” Semin. Nas. Sains Teknol. Inf., pp. 431–435, 2019.
M. A. Hailan, B. M. Albaker, and M. S. Alwan, “Transformation to a smart factory using NodeMCU with Blynk platform,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 30, no. 1, pp. 237–245, 2023.
Ardiansyah, Agus. "Monitoring Daya Listrik Berbasis IoT (Internet of Things)." Univ. Islam Indones (2020).
